快猫永久破解版.apk

Integrity-based: The market is always changing, and integrity is never changing. Li everywhere, Germany casts the future!
Consulting Hotline: Xu: 13615194676

support hotline

Xu: 13615194676
Mobile phone: Xu: 13615194676
Phone: Xu: 13615194676
Address: No.589 Xiangtai Road, Hailing District, Taizhou City, Jiangsu Province
Email: lidepower@126.com

News Center

Location: Home - News

Layout and installation of air inlet system of diesel generator set

点击量: 17 Release time: 2019-12-13 Clicks: 17

When installing the air inlet system of a diesel generator, pay attention to the tightness of the connection between the air inlet muffler and the air inlet of the external wall, the load bearing capacity of the air inlet muffler hanger, and the inlet of the air inlet muffler system must be installed with galvanized steel wire mesh. The following are the manufacturers of diesel generator sets-- Jiangsu Lide Power Equipment Co., Ltd.

1. When installing the air inlet muffler, the connection with the air inlet of the external wall must be completely sealed to prevent noise from passing through the gap and causing a lot of noise in the machine room, affecting the overall machine room effect.

Second, the hanger of the inlet muffler must have sufficient strength to lift the muffler or withstand the impact of the bracket due to the vibration of the fan.

3. The hanger of the muffler is fixed with bolts to facilitate maintenance of the muffler and fan after disassembly.

Fourth, the sound absorption sheet in the air muffler, without special requirements, use 80mm thick sound absorption sheet, the sheet spacing is 120mm.

2891db6106bf91cd9da326ad0a792f4.jpg

Fifth, the inlet air muffler is a form of civil anechoic chamber. When there is no special explanation in the design drawing, 80mm thick sound absorbing sheets are evenly distributed in the anechoic room with a pitch of 150mm.

6. The entrance of the air intake muffler system is installed with galvanized steel wire to prevent foreign objects from entering the machine room. The exit is decorated with aluminum alloy rhombus and fixed with flat iron. The exit must be on the same plane as the sound-absorbing wall or ceiling and decorated with aluminum corners.

7. The flat ribs of the frame frame of the sound-absorbing sheet are made of flat iron, and the spacing between the ribs is 500mm.

The above is a professional diesel generator set manufacturer from Jiangsu Reed Power Equipment Co., Ltd. Main brands: Cummins generator, Volvo generator, Yuchai generator, imported generator, domestic generator, Shangchai generator, diesel generator, generator Service URL: kardio.cn

Copyright: "Reed Power" ICP record number: 苏 ICP 备 15032624 号 -2